Building a 1/24 slot car drag strip can be a fun and rewarding experience. There are a few things to consider when building your track such as the width of the strip the length of the strip the type of surface and the type of start/finish line.

The width of the strip should be at least 6 inches (15 cm) wide and the length of the strip should be at least 12 feet (3.7 m). If you are planning on running multiple cars at the same time you will need to make the track wider. The type of surface you use is up to you but we recommend using a smooth surface for the best results.

The type of start/finish line is also up to you but we recommend using a rubber strip or a piece of tape for the best results. If you are using a rubber strip you will need to attach it to the track with adhesive.

Now that you have all of the materials you are ready to start building your track!

1. Start by attaching the starting line to the track. If you are using a rubber strip apply adhesive to the back of the strip and attach it to the track.

2. Next attach the track to the surface. If you are using a smooth surface you can simply place the track on top of the surface. If you are using a carpeted surface you will need to use adhesive to attach the track to the surface.

3. Once the track is in place you are ready to start racing! Place your cars at the starting line and let them rip!

What is the best way to build a 1/24 slot car drag strip?

The best way to build a 1/24 slot car drag strip is to use a plywood base and then lay down a track.

What is the best way to secure the track to the plywood base?

The best way to secure the track to the plywood base is to use track tape.

How wide should the track be?

The track should be six inches wide.

How long should the track be?

The track should be eight feet long.

What is the best way to make the starting line?

The best way to make the starting line is to use a piece of electrical tape.

What is the best way to make the finish line?

The best way to make the finish line is to use a piece of electrical tape.

How many lanes should the track have?

The track should have two lanes.

What is the best way to make the lane dividers?

The best way to make the lane dividers is to use a piece of electrical tape.

What is the best way to make the curves?

The best way to make the curves is to use a piece of electrical tape.

What is the best way to make the straightaways?

The best way to make the straightaways is to use a piece of electrical tape.

What is the best way to power the track?

The best way to power the track is to use a 9-volt battery.

What is the best way to connect the track to the power source?

The best way to connect the track to the power source is to use alligator clips.

How can I make the cars go faster?

You can make the cars go faster by adding weight to them.

What is the best way to add weight to the cars?

The best way to add weight to the cars is to use lead fishing weights.

How can I make the cars go slower?

You can make the cars go slower by removing weight from them.

Drew Dorian

I love cars and I love writing about them

Leave a comment