If you’ve ever found yourself wondering how to install power locks on a car you’re not alone. It’s a common question and a relatively easy task to do yourself. With a few tools and some patience you can have power locks installed in no time.
Here’s what you’ll need:
– A power drill
– A 1/2″ drill bit
– A drill template (or a willing friend to help hold things in place)
– A Phillips head screwdriver
– A power lock kit (available at most auto parts stores)
First use the drill template (or have your friend help) to mark the locations for the power lock mounts. Next drill two holes at each mark using the 1/2″ drill bit. Switch to the Phillips head screwdriver and use the screws that came with the power lock kit to secure the locks in place.
Finally connect the power lock wiring harness to the door lock actuators. Make sure the wires are long enough to reach the door lock actuators but not so long that they’ll get in the way when the doors are closed.
And that’s it! You’ve now successfully installed power locks on your car.
What is the first step to install power locks on a car?
The first step is to disconnect the negative battery cable.
Where is the best place to mount the power lock actuator?
The best place to mount the power lock actuator is on the door pillar.
What is the next step after mounting the power lock actuator?
The next step is to wire the actuator to the door lock switch.
How do you wire the actuator to the door lock switch?
You will need to connect the ground wire to a good ground and the positive wire to the door lock switch.
What is the last step in installing power locks on a car?
The last step is to test the doors to make sure the locks are working properly.
