If your car won’t start there are a few things you can do to try to get it going again. Sometimes it’s as simple as jumpstarting the battery or adding oil to the engine. If those things don’t work you may need to tow the car to a mechanic to have it looked at.
Jumpstarting the Battery
If your car won’t start but the headlights and radio are working the problem is probably the battery. You can try to jumpstart the battery by connecting it to another car’s battery with jumper cables.
First make sure that both cars are turned off. Then connect the positive (red) jumper cable to the positive terminal on the dead battery. Next connect the other end of the positive cable to the positive terminal on the good battery. Now connect the negative (black) cable to the negative terminal on the good battery. Finally connect the other end of the negative cable to a metal ground on the car with the dead battery.
Once the cables are all connected start the car with the good battery and let it run for a few minutes. Then try to start the car with the dead battery. If it starts let the two cars run for a few more minutes before disconnecting the cables.
If jumpstarting the battery doesn’t work the problem is probably something else.
Adding Oil to the Engine
If your car won’t start and the engine is making a clicking noise the problem may be that the engine is low on oil. You can check the oil level by looking at the dipstick. If the oil level is low add oil until it reaches the full line on the dipstick.
Once you’ve added oil to the engine try starting the car again. If it still doesn’t start the problem is likely something else.
Towing the Car
If none of the above solutions work the problem is probably more serious and you’ll need to tow the car to a mechanic. To tow the car you’ll need to attach it to a tow truck with a tow strap or tow bar.
Attach the tow strap or tow bar to the front of the car. Then attach the other end of the strap or bar to the tow truck. Make sure that the car is securely attached before starting to tow.
Once the car is attached the tow truck will pull the car to the desired location. If you’re towi
How do you jump start a car?
Answer 1: To jump start a car you will need to connect the positive terminal of one battery to the positive terminal of the other battery.
Then you will need to connect the negative terminal of the first battery to a solid metal surface on the car.
Finally you will need to connect the negative terminal of the second battery to the ground.
How do you push start a car?
Answer 2: To push start a car you will need someone to help you.
First put the car in second gear.
Then push the car until it reaches a speed of about 5-10 mph.
Finally have the person in the car let go of the clutch and press on the accelerator.
How do you tow a car?
Answer 3: To tow a car you will need to attach the tow strap to the car.
Next you will need to attach the other end of the tow strap to the tow truck.
Finally the tow truck will pull the car.
How do you push a car?
Answer 4: To push a car you will need someone to help you.
First put the car in neutral.
Then push the car until it reaches the desired location.
How do you use a tow dolly?
Answer 5: To use a tow dolly you will need to put the front wheels of the car on the dolly.
Next you will need to secure the car to the dolly.
Finally you will need to attach the dolly to the tow truck.
How do you use a car jack?
Answer 6: To use a car jack you will need to place the jack under the car.
Next you will need to pump the jack until the car is lifted off the ground.
Finally you will need to place jack stands under the car to support it.
How do you change a tire?
Answer 7: To change a tire you will need to loosen the lug nuts with a lug wrench.
Next you will need to jack up the car.
Finally you will need to remove the old tire and put on the new tire.
How do you check the oil level?
Answer 8: To check the oil level you will need to find the dipstick.
Next you will need to pull the dipstick out and wipe it off.
Finally you will need to insert the dipstick back into the car and check the level.
How do you add oil to the car?
Answer 9: To add oil to the car you will need to find the oil fill cap.
Next you will need to remove the oil fill cap and add the oil.
Finally you will need to replace the oil fill cap.
How do you check the transmission fluid level?
Answer 10: To check the transmission fluid level you will need to find the dipstick.
Next you will need to pull the dipstick out and wipe it off.
Finally you will need to insert the dipstick back into the car and check the level.
How do you add transmission fluid?
Answer 11: To add transmission fluid you will need to find the transmission fluid fill cap.
Next you will need to remove the transmission fluid fill cap and add the fluid.
Finally you will need to replace the transmission fluid fill cap.
How do you check the antifreeze level?
Answer 12: To check the antifreeze level you will need to find the radiator.
Next you will need to remove the radiator cap and check the level.
Finally you will need to add more antifreeze if needed.
How do you add antifreeze?
Answer 13: To add antifreeze you will need to find the radiator.
Next you will need to remove the radiator cap and add the antifreeze.
Finally you will need to replace the radiator cap.
How do you check the power steering fluid level?
Answer 14: To check the power steering fluid level you will need to find the power steering reservoir.
Next you will need to remove the power steering reservoir cap and check the level.
Finally you will need to add more fluid if needed.
How do you add power steering fluid?
Answer 15: To add power steering fluid you will need to find the power steering reservoir.
Next you will need to remove the power steering reservoir cap and add the fluid.
Finally you will need to replace the power steering reservoir cap.
