How To Start A Car Without Keys

If you’ve ever lost your car keys you know how frustrating it can be. You search your pockets and your purse but they’re nowhere to be found. If you’re lucky you might find a spare key hidden away somewhere. But if you don’t have a spare you’re stuck.

Or are you?

There are a few ways to start a car without keys. You can use a screwdriver to bypass the ignition or you can hotwire the car. If you’re really in a bind you can even use a cup of water.

Let’s take a closer look at each of these methods:

1. Use a screwdriver to bypass the ignition.

If you have a flathead screwdriver you can use it to start your car. Just insert the tip of the screwdriver into the keyhole and turn. This will bypass the ignition and allow you to start the car.

2. Hotwire the car.

If you’re really in a bind you can hotwire your car. This involves bypassing the ignition system altogether. To do this you’ll need to locate the starter wire and the ignition wire. Once you’ve found these wires touch them together and the car should start.

3. Use a cup of water.

If you’re out of options you can try this desperate measure. Remove the spark plug from the engine and pour a cup of water over it. Then put the spark plug back in and turn the key. The car might start but it’s not a guaranteed method.

These are just a few ways to start a car without keys. If you find yourself in this situation try one of these methods and you should be able to get on your way.

How do you start a car without keys?

You can start a car without keys by using a screwdriver to turn the ignition.

Is it easy to start a car without keys?

It is relatively easy to start a car without keys.

What do you need to start a car without keys?

All you need to start a car without keys is a screwdriver.

What is the first step to start a car without keys?

The first step is to remove the cover of the ignition.

How do you turn the ignition without keys?

You can turn the ignition without keys by using a screwdriver to turn it.

What do you do after you turn the ignition?

Once you turn the ignition you need to hold down the button on the starter.

What is the next step after holding down the starter button?

The next step is to let go of the starter button and turn the key to the “on” position.

How do you know if the car is start?

You’ll know the car is start if the engine turns over.

Do you need keys to start the car once it’s started?

No you don’t need keys to start the car once it’s started.

Can you drive the car without keys?

Yes you can drive the car without keys.

How do you remove the ignition cover?

You can remove the ignition cover by unscrewing it.

What is the purpose of the ignition cover?

The purpose of the ignition cover is to protect the ignition from dirt and debris.

Where is the ignition located?

The ignition is located on the steering column.

What is the purpose of the screwdriver?

The screwdriver is used to turn the ignition.

What is the last step?

The last step is to turn the key to the “off” position.

Leave a Comment