If your car has an automatic locking system there’s a good chance that at some point you’re going to lock your keys in the car. If you find yourself in this predicament don’t call a tow truck or a locksmith just yet. You may be able to unlock your car with a knot.
First you’ll need a long piece of string or rope. The thinner the material the better. Attach one end of the string to the door handle on the inside of the car. Then thread the string through the crack in the window and out the other side.
Once the string is through the window tie a knot in it. Make sure the knot is big and bulky as this will be what you use to unlock the door.
Next take the other end of the string and insert it into the keyhole. Apply pressure to the string with the keyhole until you feel the knot catch on something inside. Then turn the string clockwise and the door should unlock.
If the string is too thick or the knot isn’t big enough you may not be able to get the string to catch on anything inside the keyhole. In this case you’ll need to call a tow truck or a locksmith.
With a little bit of ingenuity you can often unlock a car with a knot. This method is not foolproof but it’s worth a try before you call for help.
What is the best way to tie a knot to unlock a car?
The best way to tie a knot to unlock a car is to use a rope or a string.
How do you tie a knot to unlock a car?
You tie a knot to unlock a car by using a rope or a string.
How tight should the knot be?
The knot should be tight enough that it will not come undone but not so tight that it will be difficult to undo.
What is the best type of knot to use?
The best type of knot to use is a square knot.
How do you make a square knot?
You make a square knot by taking the left side over the right side and then under and then taking the right side over the left side and then under.
What is the difference between a square knot and a granny knot?
A square knot is stronger and will not come undone as easily as a granny knot.
How do you make a granny knot?
You make a granny knot by taking the left side over the right side and then under and then taking the right side over the left side and then under.
However you do not cross the sides in the same direction each time.
What is the best way to finish the knot?
The best way to finish the knot is to tie a second knot in the opposite direction.
What is the second knot called?
The second knot is called a Reef knot.
How do you tie a Reef knot?
You tie a Reef knot by taking the left side over the right side and then under and then taking the right side over the left side and then under.
You then repeat this in the opposite direction.
What is the difference between a Reef knot and a Granny knot?
A Reef knot is stronger and will not come undone as easily as a Granny knot.
What is the difference between a Reef knot and a Square knot?
A Reef knot is slightly easier to untie than a Square knot.
How do you know if the knot is tight enough?
You know the knot is tight enough if it is difficult to pull apart.
How do you know if the knot is too tight?
You know the knot is too tight if it is difficult to undo.
Is there anything else you need to do to the knot?
Once the knot is tied you can tug on the ends to tighten it if needed.
